Steel rolling stays with gentle cable support and steel dividers. Ideal for using media hoses with soft sheathing. Easy screw connection.
Available customized in 1 mm width sections.
Inside/outside: Screw connection detachable
Option: Divider systems made from steel and stainless steel ER 1, ER 1S.
Stay arrangement on every 2nd chain link, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bk
100 - 500 mm
in 1 mm width sections
Rozmery
Rozmery
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table">
<thead>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<th class="t"><strong>t</strong><br>[mm]</th>
<th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th>
<th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th>
<th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th>
<!-- Bk und BEF für alle Ketten -->
<th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th>
</tr>
</thead>
<tbody>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<td class="t">105</td>
<td class="hi red">54</td>
<td class="hg">80</td>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<td class="bi">
84 - 484
</td>
<td class="bst red">
84 - 484
</td>
<!-- Bk und BEF für alle Ketten -->
<td class="bk">BSt + 16</td>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<td class="qk">4.25 - 7.80</td>
</tr>
</tbody>
</table>
* in1 mm width sections
KR [mm]
105
125
155
195
260
295
325
365
430
Príklad objednania
LS1050
Typový rad
•
180
BSt [mm]
•
RR
Konštrukcia mostíka
•
125
KR [mm]
•
Sb
Materiál
-
2415
Lk [mm]
HS
Usporiadanie mostíka
Vnútorné rozdelenie
Vnútorné rozdelenie
Divider systems
As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).
The dividers are fixed through the tubes. The tube additionally serves as a spacer between the dividers (version B).
Divider system TS0 without height separation
Vers.
aT min [mm]
ax min [mm]
ac min [mm]
nT min
B
20
20
16
–
Divider system TS1 with continuous height separation
Vers.
aT min [mm]
aT max [mm]
ax min [mm]
ac min [mm]
nT min
B
20
25
20
16
2
Príklad objednania
TS1
Systém mriežok
•
B
Verzia
•
3
nT
•
K1
•
K4
Komora
•
34
•
38
ax
-
VD0
-
VD0
výškové rozdelenie
Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).
Pripojovacie prvky
Pripojovacie prvky
Connection point F – fixed point M – driver
Connection type A – threaded joint outside (standard) I – threaded joint inside
Connection surface A – connecting surface outside I – connecting surface inside
Príklad objednania
Steel
Steel
pripojeniesprvok
•
F
•
M
pripojeniebod
A
A
Spôsob pripojenia
I
I
Pripojovacia plocha
We recommend the use of strain reliefs before driver and fixed point.
