Skip to main navigation Skip to main content Skip to page footer
Slovak
LS/LSX1050 LG

LS/LSX1050 LG

Aluminum stay LG – hole stay, split version

Vlastnosti

  • Optimum cable routing in the neutral bending line. Split version for easy cable routing. Stays also available unsplit.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Stay arrangement on every 2nd chain link, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bk 100 - 600 mm in 1 mm width sections

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
Calculating the stay width
Stay width BSt: BSt = Σ D + Σ c + 2 a0
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="dmax red"><strong>D<sub>max</sub></strong><br>[mm]</th> <th class="dmin"><strong>D<sub>min</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="cmin"><strong>c<sub>min</sub></strong><br>[mm]</th> <th class="a0min"><strong>a<sub>0</sub> min</strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk50"><strong>q<sub>k</sub> 50%</strong><br>[kg/m]<sup>**</sup></th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">105</td> <td class="dmax red">48</td> <td class="dmin">12</td> <td class="hg">80</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 54 - 554 </td> <td class="bst red"> 82 - 582 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 18</td> <td class="cmin">4</td> <td class="a0min">14</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk50">4.00 - 7.99</td> </tr> </tbody> </table>
* in1 mm width sections ** Hole ratio of the hole stay approx. 50 %
KR [mm]
105 125 155 195 260 295 325 365 430
qk 50%: 4.00 - 7.99 mm Hole ratio of the hole stay approx. 50 %

Príklad objednania

LS1050
Typový rad
•
180
BSt [mm]
•
LG
Stay variant
•
125
KR [mm]
•
Sb
Materiál
-
2415
Lk [mm]
HS
Usporiadanie mostíka

Pripojovacie prvky Pripojovacie prvky

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside

Connection surface
A – connecting surface outside
I – connecting surface inside

Príklad objednania

Steel
Steel
pripojenies­prvok
•
F
•
M
pripojenie­bod
A
A
Spôsob pripojenia
I
I
Pripojovacia plocha

We recommend the use of strain reliefs before driver and fixed point.