Skip to main navigation Skip to main content Skip to page footer
Slovak
UA1250.020

UA1250.020

Stay variant 020 – closed frame

Vlastnosti

  • Weight-optimised, closed plastic frame with particularly high torsional rigidity.
  • Outside/inside: not openable.
Stay arrangement on each chain link (VS: fully-stayed)
Bi 30 - 50 mm

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">25</td> <td class="hi red">17.5</td> <td class="hg">23</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 10</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">0.32 – 0.36</td> </tr> </tbody> </table>
Bi [mm]
30 50
KR [mm]
28 38 45 60 75 100

Príklad objednania

UA1250
Typový rad
•
020
Stay variant
•
50
Bi [mm]
•
75
KR [mm]
-
1100
Lk [mm]
VS
Usporiadanie mostíka

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A364––
B3642–

Príklad objednania

TS0
Systém mriežok
•
A
Verzia
•
3
nT

Please state the designation of the divider system (TS0), the version, and the number of dividers per cross section [nT]. You are welcome to add a sketch to your order.

Pripojovacie prvky Pripojovacie prvky

Bi
[mm]		BEF
[mm]		nz
30402
50604

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Príklad objednania

End connector
End connector
pripojenies­prvok
•
F
•
M
pripojenie­bod
A
A
Spôsob pripojenia