Skip to main navigation Skip to main content Skip to page footer
Slovak
UA1665.020

UA1665.020

Stay variant 020 – closed frame

Vlastnosti

  • Weight-optimised, closed plastic frame with particularly high torsional rigidity.
  • Outside/inside: not openable.
Stay arrangement on each chain link (VS: fully-stayed)
Bi 50 - 250 mm

Rozmery Rozmery

<p>The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.</p>
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">66.5</td> <td class="hi red">44</td> <td class="hg">60</td> <td class="hgdash">63</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 22</td> <td class="bef">Bi + 27</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">1.67 – 2.76</td> </tr> </tbody> </table>
Bi [mm]
50 75 100 125 150 175 200 225 250
KR [mm]
75 100 120 140 200 250 300

Príklad objednania

UA1665
Typový rad
•
020
Stay variant
•
125
Bi [mm]
•
140
KR [mm]
-
2660
Lk [mm]
VS
Usporiadanie mostíka

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral acceleration and lying on the side, divider with arresting cams are available. The locking cams click into place in the locking grids in the stays (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A5107––

Number of dividers for design 020 depending on Bi

Príklad objednania

TS0
Systém mriežok
•
A
Verzia
•
2
nT

Pripojovacie prvky Pripojovacie prvky

Recommended tightening torque: 5 Nm for screws M5 - 8.8
Bi
[mm]		nz
502 x 3
752 x 5
1002 x 7
1252 x 9
1502 x 11
1752 x 13

The end connectors are also available as an option with strain relief comb or with C-rail Art. no 3931 (1 on each side) for clamps. Please state when ordering.

Connection point
F – fixed point
M – driver

Connection type
U – Universal mounting bracket

Príklad objednania

UMB
UMB
pripojenies­prvok
•
F
•
M
pripojenie­bod
U
U
Spôsob pripojenia

We recommend the use of strain reliefs at the driver and fixed point.

Recommended tightening torque: 15 Nm for screws M8 - 8.8
Bi
[mm]		nz
502 x 4
752 x 6
1002 x 8
1252 x 10
1502 x 12
1752 x 14
2002 x 16
2252 x 18
2502 x 20

The end connectors are optionally also available without strain relief comb. Please state when ordering.

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Príklad objednania

End connector
End connector
pripojenies­prvok
•
F
•
M
pripojenie­bod
A
A
Spôsob pripojenia