TRAXLINE® CONTROL 1000 C TPE 300/500 V
Shielded continuous bending hi-flex TPE control cables
TPE outer jacket
<p>pressure-extruded, hi-flex design,<br />high abrasion resistant</p>
CU braided cover
<p>tinned with high flexibility</p>
TPE inner jacket
<p>valley-sealed-extruded,<br />hi-flex design</p>
Bundle stranding
<p>bundled cores stranded around optimized<br />center element (> 8 cores)</p>
PP core insulation
<p>hi-flex design,<br />low capacitance</p>
Up to 10 Million
Motion cycles
Up to 1000 m
Travel length
General information
- Communication between transmitter and receiver
- Logical state of 0 and 1 control
- Good EMC-protection by overall-shield
- Signal for turning on and off/start and stop
- Outer jacket pressure extruded and high abrasion resistant
- Inner jacket valley-sealed extruded
Norms and standards
- Oil-resistant
- CFC-free
- UV-resistant
- REACH/RoHS II
- Ozone-resistant
- Halogen-free
- Silicone-free
Design
| Conductor: | Class 6 |
| Core insulation: | PP/9Y |
| Core identification: | Black, coded with white numbers, 1 x ye/gn |
| Core stranding: | Bundle stranded (> 8 cores) Layer stranded (≤ 8 cores) |
| Inner jacket: | TPE |
| Shield: | Shielded |
| Jacket color: | Black |
| Outer jacket: | TPE |
Technical data
| Temperature range while moved: | -35 up to +90 °C |
| Minimum bend radius while moved: | KRmin ≥ 5 x Ø |
| Vmax supported: | 20 m/s |
| Vmax gliding: | 5 m/s |
| amax supported: | 50 m/s2 |
| amax gliding: | 50 m/s2 |
| Insulation resistance: | > 30 MΩ x km |
| Nominal voltage control core(s): | according to VDE 0.30/0.50 kV |
Varying parameters possible.
Type selection
TRAXLINE® CONTROL 1000 C TPE 300/500 V – Shielded
Core number x Cross-section | Part no. | max. ∅ | Cable weight | Copper index | Datasheet |
|---|---|---|---|---|---|
(12 G 0.5²) | 49709 | 12.5 | 0.209 | 0.109 | |
(18 G 0.5²) | 49712 | 14.5 | 0.274 | 0.167 | |
(25 G 0.5²) | 49715 | 16.6 | 0.364 | 0.212 | |
(12 G 0.75²) | 49729 | 13.5 | 0.242 | 0.147 | |
(18 G 0.75²) | 49732 | 15.9 | 0.328 | 0.222 | |
(25 G 0.75²) | 49735 | 19.0 | 0.482 | 0.293 | |
(12 G 1²) | 49749 | 14.3 | 0.281 | 0.174 | |
(18 G 1²) | 49752 | 17.8 | 0.496 | 0.240 | |
(25 G 1²) | 49755 | 20.8 | 0.585 | 0.332 | |
(36 G 1²) | 49757 | 25.4 | 0.851 | 0.485 | |
(49 G 1²) | 49759 | 30.0 | 1.136 | 0.660 |
Additional types upon request.
Matching with
Cable carriers
Whether cable carriers made of steel, plastic or hybrid product – at KABELSCHLEPP® the conditions of your application determine the material. After assessing your application parameters we will recommend a product that represents the optimum in terms of load capacity, durability and longevity. The material itself is secondary. You can choose from our product portfolio of thousands of types between standard widths and individual millimeter grids – just as required.
Ready-to-connect cable carrier systems – TOTALTRAX®
From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP® systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
Accessories – Strain relief devices
For optimum placement with dynamic use of cables.