Optimum cable routing in the neutral bending line. Split version for easy cable routing. Stays also available unsplit.
Available customized in 1 mm grid.
Inside/outside: Threaded joint easy to release.
Stay arrangement on every 2nd chain link, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bk
70 - 500 mm
in 1 mm width sections
Rozmery
Rozmery
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
Calculating the stay width
Stay width BSt: BSt = Σ D + Σ c + 2 a0
<table class="table">
<thead>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<th class="t"><strong>t</strong><br>[mm]</th>
<th class="dmax red"><strong>D<sub>max</sub></strong><br>[mm]</th>
<th class="dmin"><strong>D<sub>min</sub></strong><br>[mm]</th>
<th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th>
<th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th>
<th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th>
<!-- Bk und BEF für alle Ketten -->
<th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th>
<th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th>
<th class="cmin"><strong>c<sub>min</sub></strong><br>[mm]</th>
<th class="a0min"><strong>a<sub>0</sub> min</strong><br>[mm]</th>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<th class="qk50"><strong>q<sub>k</sub> 50%</strong><br>[kg/m]<sup>**</sup></th>
</tr>
</thead>
<tbody>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<td class="t">65</td>
<td class="dmax red">34</td>
<td class="dmin">10</td>
<td class="hg">50</td>
<td class="hgdash">56</td>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<td class="bi">
35 - 465
</td>
<td class="bst red">
53 - 483
</td>
<!-- Bk und BEF für alle Ketten -->
<td class="bk">BSt + 17</td>
<td class="bef">BSt + 22</td>
<td class="cmin">4</td>
<td class="a0min">9</td>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<td class="qk50">3.96 - 6.46</td>
</tr>
</tbody>
</table>
* in1 mm width sections** Hole ratio of the hole stay approx. 50 %
KR [mm]
75
95
115
125
135
145
155
175
200
250
300
400
qk 50%:
3.96 - 6.46 mm
Hole ratio of the hole stay approx. 50 %
Príklad objednania
S0650
Typový rad
•
180
BSt [mm]
•
LG
Stay variant
•
135
KR [mm]
•
St
Materiál
-
1430
Lk [mm]
HS
Usporiadanie mostíka
Pripojovacie prvky
Pripojovacie prvky
Connection point F – fixed point M – driver
Connection type A – threaded joint outside (standard) I – threaded joint inside H – threaded joint, rotated 90° to the outside K – threaded joint, rotated 90° to the inside
Connection surface I – connection surface inside (standard) A – connecting surface outside
Caution: The standard connection variant FAI/MAI is only possible from Bk of 70 mm.
Príklad objednania
Steel
Steel
pripojeniesprvok
•
F
•
M
pripojeniebod
A
A
Spôsob pripojenia
I
I
Pripojovacia plocha
We recommend the use of strain reliefs at the driver and fixed point.
