Skip to main navigation Skip to main content Skip to page footer
Slovak
S/SX1800 RR

S/SX1800 RR

Tube stay RR – frame stay, tube version

Vlastnosti

  • Steel rolling stays with gentle cable support and steel dividers. Ideal for using media hoses with soft sheathing. Easy screw connection.
  • Available customized in 1 mm width sections.
  • Inside/outside: Screw connection detachable
  • Option: Divider systems made from stainless steel ER 1, ER 1S.
Stay arrangement on every 2nd chain link, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bk 250 - 800 mm in 1 mm width sections

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">180</td> <td class="hi red">104</td> <td class="hg">140</td> <td class="hgdash">155</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 201 - 751 </td> <td class="bst red"> 221 - 771 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 29</td> <td class="bef">BSt + 40</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">26.57 - 36.05</td> </tr> </tbody> </table>
* in1 mm width sections
KR [mm]
265 320 375 435 490 605 720 890 1,175 1,300

Príklad objednania

S1800
Typový rad
•
417
BSt [mm]
•
RR
Stay variant
•
375
KR [mm]
•
St
Materiál
-
5940
Lk [mm]
HS
Usporiadanie mostíka

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

The divider system is mounted on each crossbar as a Standard – on every 2nd chain link for stay mounting (HS).

As a standard, dividers or the complete divider System (dividers with height separations) are movable in the cross section (version A).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
B454540–

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
B4545402

Príklad objednania

TS1
Systém mriežok
•
B
Verzia
•
3
nT
•
K1
•
K4
Komora
•
34
•
38
ax
-
VD0
-
VD0
výškové rozdelenie

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

Pripojovacie prvky Pripojovacie prvky

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface
I – connection surface inside
A – connection surface outside

Caution: The standard connection variant FAI/MAI is only possible from Bk of 139 mm.

Príklad objednania

Steel
Steel
pripojenies­prvok
•
F
•
M
pripojenie­bod
A
A
Spôsob pripojenia
I
I
Pripojovacia plocha

We recommend the use of strain reliefs at the driver and fixed point.