Skip to main navigation Skip to main content Skip to page footer
Slovak
S/SX2500 RM

S/SX2500 RM

Aluminum stay RM – frame stay, solid

Vlastnosti

  • Aluminum profile bars for heavy loads and maximum cable carrier widths. Double threaded joint on both sides “Heavy Duty”.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Stay arrangement on every 2nd chain link, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bk 250 - 1200 mm in 1 mm width sections

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">250</td> <td class="hi red">183</td> <td class="hg">220</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 175 - 1125 </td> <td class="bst red"> 218 - 1168 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 32</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">38.68 - 44.58</td> </tr> </tbody> </table>
* in1 mm width sections
KR [mm]
365 445 600 760 920 1,075 1,235 1,395

Príklad objednania

S2500
Typový rad
•
806
BSt [mm]
•
RM
Stay variant
•
760
KR [mm]
•
St
Materiál
-
9250
Lk [mm]
HS
Usporiadanie mostíka

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).

As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A192513–

The dividers can be moved in the cross section.

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A1913252

The dividers can be moved in the cross section.

Divider system TS2
with partial height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A4046342

Standard height separation with tube Ø 16 mm.
The dividers can be moved in the cross section.

Príklad objednania

TS2
Systém mriežok
•
A
Verzia
•
2
nT
•
K1
•
K3
Komora
•
34
•
38
ax
-
VR1
-
VR3
výškové rozdelenie

Pripojovacie prvky Pripojovacie prvky

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside

Príklad objednania

Steel
Steel
pripojenies­prvok
•
F
•
M
pripojenie­bod
A
A
Spôsob pripojenia

We recommend the use of strain reliefs at the driver and fixed point.