Skip to main navigation Skip to main content Skip to page footer
Slovak
TKR0200.030

TKR0200.030

Stay variant 030 – with outside opening and detachable crossbars

Vlastnosti

  • Low-vibration plastic frame with particularly long service life thanks to molded chain links.
  • Swivable and detachable on one side in any position.
  • Outside: Swivable and detachable
  • Inside: detachable
Stay arrangement on each chain link (VS: fully-stayed)
Bi 40 - 120 mm

Rozmery Rozmery

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Calculating the cable carrier length
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t for odd number of chain links
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">20</td> <td class="hi red">28</td> <td class="hg">37</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 16</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">0.6 - 1.0</td> </tr> </tbody> </table>
Bi [mm]
40 50 60 80 100 120
KR [mm]
55 75 95 150

Príklad objednania

TKR0200
Typový rad
•
80
Bi [mm]
•
030
Stay variant
•
95
KR [mm]
-
800
Lk [mm]
VS
Usporiadanie mostíka

Vnútorné rozdelenie Vnútorné rozdelenie

Divider systems

As standard, the divider system is mounted on every 2nd chain link. As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).

Fixable dividers are available for applications with lateral accelerations and for applications lying on the side. The arresting cams click into place in the locking grids in the crossbars (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A486––
BA864–
ABi [mm]40506080100120
aT min [mm]456466

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A486–2
BA8642
ABi [mm]40506080100120
aT min [mm]456466

Príklad objednania

TS1
Systém mriežok
•
A
Verzia
•
3
nT
-
VD0
-
VD1
výškové rozdelenie

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT ].

If using divider systems with height separation (TS1) please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

Pripojovacie prvky Pripojovacie prvky

Recommended tightening torque: 0,6 Nm for screws M4

Connection point
F – fixed point
M – driver

Connection type
U – universal mounting bracket

Príklad objednania

UMB
UMB
pripojenies­prvok
•
F
•
M
pripojenie­bod
U
U
Spôsob pripojenia

We recommend the use of strain reliefs at the driver and fixed point.