Skip to main navigation Skip to main content Skip to page footer
Polish
KC0650 LG

KC0650 LG

Aluminum stay LG – Hole stay, split version

Właściwości

  • Optimum cable routing in the neutral bending line. Split version for easy cable routing. Stays also available unsplit.
  • Available customized in 1 mm width sections.
  • Outside/inside: Screw-fixing easy to release.
Stays on every 2nd section, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bi 75 - 600 mm w 1 sekcje szerokości mm

Wymiary Wymiary

The outer width of the cable carrier corresponds to dimension BEF for stay variant LG.
The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
Obliczanie szerokości poprzeczki
Stay width BSt: BSt ≈ ∑D + ∑c + 2 a0
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="dmax red"><strong>D<sub>max</sub></strong><br>[mm]</th> <th class="dmin"><strong>D<sub>min</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]<sup>*</sup></th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]</th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <th class="cmin"><strong>c<sub>min</sub></strong><br>[mm]</th> <th class="a0min"><strong>a<sub>0</sub> min</strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk50"><strong>q<sub>k</sub> 50%</strong><br>[kg/m]<sup>**</sup></th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">65</td> <td class="dmax red">36</td> <td class="dmin">9</td> <td class="hg">57.5</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 75 - 600 </td> <td class="bst red"> 73 - 598 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 30</td> <td class="bef">BSt + 38</td> <td class="cmin">4</td> <td class="a0min">9</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk50">2.20 – 5.15</td> </tr> </tbody> </table>
* w1 sekcje szerokości mm ** Hole ratio of the hole stay approx. 50 %
KR [mm]
75 115 145 175 220 300
qk 50%: 2.20 – 5.15 mm Hole ratio of the hole stay approx. 50 %

Przykład zamówienia

KC0650
Typ
•
176
Bi [mm]
•
LG
Wariant poprzeczki
•
115
KR [mm]
-
1430
Lk [mm]
HS
Układ poprzeczek

Złączki końcowe Złączki końcowe

Connection point
F – fixed point
M – driver

Connection type
U – Universal mounting bracket

Przykład zamówienia

UMB
UMB
Złączka końcowa
•
F
•
M
Punkt połączenia
U
U
Typ połączenia

We recommend the use of strain reliefs at the driver and fixed point.