Skip to main navigation Skip to main content Skip to page footer
Polish
LS/LSX1050 RR

LS/LSX1050 RR

Tube stay RR – frame stay, tube version

Właściwości

  • Steel rolling stays with gentle cable support and steel dividers. Ideal for using media hoses with soft sheathing. Easy screw connection.
  • Available customized in 1 mm width sections.
  • Inside/outside: Screw connection detachable
  • Option: Divider systems made from steel and stainless steel ER 1, ER 1S.
Stays on every 2nd section, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bk 100 - 500 mm w 1 sekcje szerokości mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">105</td> <td class="hi red">54</td> <td class="hg">80</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 84 - 484 </td> <td class="bst red"> 84 - 484 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 16</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">4.25 - 7.80</td> </tr> </tbody> </table>
* w1 sekcje szerokości mm
KR [mm]
105 125 155 195 260 295 325 365 430

Przykład zamówienia

LS1050
Typ
•
180
BSt [mm]
•
RR
Wariant poprzeczki
•
125
KR [mm]
•
Sb
Materiał
-
2415
Lk [mm]
HS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

As a standard, the divider system is mounted on each crossbar – for stay mounting on every 2nd chain link (HS).

The dividers are fixed through the tubes. The tube additionally serves as a spacer between the dividers (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
B202016–

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		aT max
[mm]		ax min
[mm]		ac min
[mm]		nT min
B202520162

Przykład zamówienia

TS1
System przegródek
•
B
Wersja
•
3
nT
•
K1
•
K4
Komora
•
34
•
38
ax
-
VD0
-
VD0
Separacja wysokości

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT]. In addition, please also enter the chambers [K] from left to right, as well as the assembly distances [aT/ax] (as seen from the driver).

Złączki końcowe Złączki końcowe

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside

Connection surface
A – connecting surface outside
I – connecting surface inside

Przykład zamówienia

Steel
Steel
Złączka końcowa
•
F
•
M
Punkt połączenia
A
A
Typ połączenia
I
I
Powierzchnia połączenia

We recommend the use of strain reliefs before driver and fixed point.