Aluminum profile bars with plastic mounting frame stays for guiding very large cable diameters.
The mounting frame stay is mounted on the outside in the bending radius.
Available customized in 1 mm width sections.
Outside: Screw-fixing easy to release.
Stays on every 2nd section, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bi
200 - 800
mm
w 1 sekcje szerokości mm
Wymiary
Wymiary
<p>The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.</p>
<p><strong>Intrinsic cable carrier weight</strong><br />Determining the intrinsic cable carrier weight strongly depends on the selected stay arrangement. Please contact us.</p>
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table">
<thead>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<th class="t"><strong>t</strong><br>[mm]</th>
<th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th>
<th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<th class="bi red"><strong>B<sub>i</sub></strong><br>[mm]<sup>*</sup></th>
<!-- Bk und BEF für alle Ketten -->
<th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th>
<th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th>
</tr>
</thead>
<tbody>
<tr>
<!-- Reihenfolge gemäß Kundenwunsch -->
<td class="t">125</td>
<td class="hi red">72</td>
<td class="hg">96</td>
<!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range -->
<td class="bi red">
200 - 800
</td>
<!-- Bk und BEF für alle Ketten -->
<td class="bk">Bi + 45</td>
<td class="bef">Bi + 45</td>
<!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range -->
<td class="qk"></td>
</tr>
</tbody>
</table>
* w1 sekcje szerokości mm
Hi [mm]
130
160
200
KR [mm]
180
220
260
300
340
380
500
Przykład zamówienia
MC1250
Typ
•
400
Bi [mm]
•
RMAO
Wariant poprzeczki
•
300
KR [mm]
-
4250
Lk [mm]
HS
Układ poprzeczek
RMAO – assembly to the outside:
The cable carrier has to rest on the side bands and not on the stays. Guiding in a channel is required for support. Please contact our technical support at technik@kabelschlepp.de to find the corresponding guide channel. Please note the operating and installation height.
Złączki końcowe
Złączki końcowe
Recommended tightening torque: 54 Nm for cheese-head screws ISO 4762 - M10 - 8.8
Connection point F – fixed point M – driver
Connection type U – universal mounting bracket
Przykład zamówienia
UMB
UMB
Złączka końcowa
•
F
•
M
Punkt połączenia
U
U
Typ połączenia
We recommend the use of strain reliefs at the driver and fixed point.
Connection point F – fixed point M – driver
Connection type A – threaded joint outside (standard) I – threaded joint inside F – flange connection
Connection surface I – connection surface inside A – connection surface outside
Przykład zamówienia
Plastic/steel
Plastic/steel
Złączka końcowa
F
M
Punkt połączenia
A
A
Typ połączenia
A
I
Powierzchnia połączenia
We recommend the use of strain reliefs at the driver and fixed point.
