Skip to main navigation Skip to main content Skip to page footer
Polish
S/SX0650 Tubes RMD

S/SX0650 Tubes RMD

Aluminum stay RMD – aluminum cover system

Właściwości

  • Bolted aluminum covers for maximum stability.
  • For applications generating chips or coarse contamination.
  • Available customized in 1 mm grid.
  • Inside/outside: Threaded joint easy to release.
Stay arrangement on each chain link (VS: fully-stayed)
Bk 100 - 500 mm w 1 sekcje szerokości mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <th class="hgdash"><strong>h<sub>G'</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]</th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]<sup>*</sup></th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">65</td> <td class="hi red">30</td> <td class="hg">50</td> <td class="hgdash">56</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 65 - 465 </td> <td class="bst red"> 85 - 485 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 15</td> <td class="bef">BSt + 20</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">4.84 - 10.50</td> </tr> </tbody> </table>
* w1 sekcje szerokości mm
KR [mm]
115 125 135 145 155 175 200 250 300 400

Przykład zamówienia

SX0650
Typ
•
180
BSt [mm]
•
RMD
Wariant poprzeczki
•
135
KR [mm]
•
St
Materiał
-
1430
Lk [mm]
VS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

As a standard, the divider system is mounted on every 2nd cover/chain link (HS).

As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A11.51310–

The dividers can be moved in the cross section.

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		nT min
A11.513102

The dividers can be moved in the cross section.

Przykład zamówienia

TS1
System przegródek
•
A
Wersja
•
3
nT
-
VD0
-
VD1
Separacja wysokości

Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT].

If using divider systems with height separation (TS1) please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.

The end dividers are part of the divider system and don‘t have to be ordered separately.

Złączki końcowe Złączki końcowe

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
H – threaded joint, rotated 90° to the outside
K – threaded joint, rotated 90° to the inside

Connection surface
A – connection surface inside (standard)
I – connection surface outside

Caution: The standard connection variant FAI/MAI is only possible from Bk of 70 mm.

Przykład zamówienia

Steel
Steel
Złączka końcowa
•
F
•
M
Punkt połączenia
A
A
Typ połączenia
I
I
System przegródek

We recommend the use of strain reliefs at the driver and fixed point.