Skip to main navigation Skip to main content Skip to page footer
Polish
TKK39.040

TKK39.040

Stay variant 040 – with inside opening crossbar

Właściwości

  • Weight-optimised plastic frame with particularly high torsional rigidity.
  • Crossbars can be opened at any position on one side.
  • Inside: openable.
Stay arrangement on each chain link (VS: fully-stayed)
Bi 39 - 99 mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">39</td> <td class="hi red">39</td> <td class="hg">50</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 21</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">1.29 – 1.72</td> </tr> </tbody> </table>
Bi [mm]
39 59 74 99
KR [mm]
46 58 70 95

Przykład zamówienia

TKK39
Typ
•
040
Wariant poprzeczki
•
74
Bi [mm]
•
70
KR [mm]
-
1950
Lk [mm]
VS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

The divider system is mounted on every 2nd chain link as a standard. Dividers, and the complete divider system (dividers with height separations) comes as diameter adjustable as standard (version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay. The arresting cams snap into the catch profiles in the crossbars (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A5107––
B9.51072–

The dividers can be moved in the cross section.

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A5107–2
B9.510722

The dividers can be moved in the cross section.

Przykład zamówienia

TS1
System przegródek
•
A
Wersja
•
3
nT
-
VD1
-
VD3
Separacja wysokości

Please state the designation of the divider system (TS0, TS1,...), the version, and the number of dividers per cross section [nT].

When using divider systems with height separation (TS1), please additionally state the position (e.g. VD1) viewed from the left driver belt. You are welcome to add a sketch to your order.

Złączki końcowe Złączki końcowe

Connection point
F – fixed point
M – driver

Connection type
A – connecting surface outside
I – connecting surface inside

Connection surface
A – threaded joint outside (standard)
I – threaded joint inside

Przykład zamówienia

Steel
Steel
Złączka końcowa
•
F
•
M
Punkt połączenia
A
A
Typ połączenia
I
I
Powierzchnia połączenia

We recommend the use of strain reliefs at the driver and fixed point.