Skip to main navigation Skip to main content Skip to page footer
Polish
TKP35.040

TKP35.040

Stay variant 040 – with inside opening and detachable crossbars

Właściwości

  • Weight-optimised plastic frame with particularly high torsional rigidity.
  • Can be opened at any position on both sides.
  • Inside: opening and detachable crossbars.
Stay arrangement on each chain link (VS: fully-stayed)
Bi 25 - 50 mm

Wymiary Wymiary

<p>The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.</p>
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="hi red"><strong>h<sub>i</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk"><strong>q<sub>k</sub></strong><br>[kg/m]</th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">35</td> <td class="hi red">32</td> <td class="hg">40</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <!-- Bk und BEF für alle Ketten --> <td class="bk">Bi + 12</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk">0.6 – 0.8</td> </tr> </tbody> </table>
Bi [mm]
25 38 50
KR [mm]
48 60 75 100 125

Przykład zamówienia

TKP35
Typ
•
040
Wariant poprzeczki
•
50
Bi [mm]
•
100
KR [mm]
-
700
Lk [mm]
VS
Układ poprzeczek

Podział wewnętrzny Podział wewnętrzny

Divider systems

The divider system is mounted on every 2nd chain link as a standard. As a standard, dividers or the complete divider system (dividers with height separations) are movable in the cross section (version A).

For applications with lateral accelerations and applications with the cable carrier rotated by 90°, the dividers can easily be fixed on the stay through rotation. The arresting cams snap into the catch profiles in the covers (version B).

Divider system TS0
without height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A364––
B4,5* / 5642–

* Only Bi 25

Divider system TS1
with continuous height separation

Vers.aT min
[mm]		ax min
[mm]		ac min
[mm]		ax grid
[mm]		nT min
A364–2
B4,5* / 56422

* Only Bi 25

The dividers can be moved in the cross section.

Przykład zamówienia

TS1
System przegródek
•
A
Wersja
•
3
nT
-
VD1
-
VD3
Separacja wysokości

Please state the designation of the divider system (TS0, TS1,...), the version, and the number of dividers per cross section [nT].

When using divider systems with height separation (TS1), please additionally state the position (e.g. VD1) viewed from the left driver belt. You are welcome to add a sketch to your order.

Złączki końcowe Złączki końcowe

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside

Przykład zamówienia

End connector
End connector
Złączka końcowa
•
F
•
M
Punkt połączenia
A
A
Typ połączenia

The end connectors are optionally also available without strain relief comb.
Bi
[mm]		BEF
[mm]		nz
25372
38504
50626

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside

Przykład zamówienia

End connector
End connector
Złączka końcowa
•
F
•
M
Punkt połączenia
A
A
Typ połączenia