TKR0370 RE
Plastic stay RE – screw-in frame stay
Właściwości
- Plastic stay for light and medium loads. Assembly without screws.
- Available in 5 widths.
- Outside/inside: to open by rotating.
Wymiary Wymiary
| Bi [mm] | ||||
|---|---|---|---|---|
| 40 | 50 | 60 | 70 | 80 |
| KR [mm] | ||
|---|---|---|
| 55 | 75 | 100 |
Przykład zamówienia
Podział wewnętrzny Podział wewnętrzny
Divider systems
As standard, the divider system is mounted on every 2nd chain link. As a standard, dividers and the complete divider system (dividers with height separations) can be moved in the cross section (version A).
Fixable dividers are available for applications with lateral accelerations and for applications lying on the side. The arresting cams click into place in the locking grids in the crossbars (version B).
Divider system TS0
without height separation
| Vers. | aT min [mm] | ax min [mm] | ac min [mm] | ax grid [mm] | nT min |
|---|---|---|---|---|---|
| A | 7.5 | 8 | 6 | – | – |
| B | A | 8 | 6 | 2 | – |
| A | Bi [mm] | 40 | 50 | 60 | 70 | 80 |
| aT min [mm] | 8 | 9 | 8 | 9 | 8 |
Divider system TS1
with continuous height separation
| Vers. | aT min [mm] | ax min [mm] | ac min [mm] | ax grid [mm] | nT min |
|---|---|---|---|---|---|
| A | 7.5 | 8 | 6 | – | 2 |
| B | A | 8 | 6 | 2 | 2 |
| A | Bi [mm] | 40 | 50 | 60 | 70 | 80 |
| aT min [mm] | 8 | 9 | 8 | 9 | 8 |
Przykład zamówienia
Please state the designation of the divider system (TS0, TS1 …), version and number of dividers per cross section [nT ].
If using divider systems with height separation (TS1) please also state the positions [e.g. VD1] viewed from the left driver belt. You are welcome to add a sketch to your order.
Złączki końcowe Złączki końcowe
| Bi [mm] | BEF [mm] | nz |
|---|---|---|
| 40 | 59 | 3 |
| 50 | 69 | 4 |
| 60 | 79 | 5 |
| 70 | 89 | 6 |
| 80 | 99 | 7 |
Connection point
F – fixed point
M – driver
Connection type
U – universal mounting bracket