TRAXLINE® POWER ONE 1000 C TPE 1 KV
Shielded continuous bending hi-flex TPE single-core cables
TPE outer jacket
<p>pressure-extruded, hi-flex design,<br />high abrasion resistant</p>
CU braided cover
<p>tinned with high flexibility</p>
PP core insulation
<p>hi-flex design,<br />low capacitance</p>
Wire bundles
<p>short pitch length,<br />hi-flex design</p>
Up to 10 Million
Motion cycles
Up to 1000 m
Travel length
General information
- Power supply for electrical applications and drives
- Transmission of large electrical currents
- Good EMC-protection by overall-shield
- For small bending radii and long travel distance
- Outer jacket pressure extruded and high abrasion resistant
Norms and standards
- Oil-resistant
- CFC-free
- UV-resistant
- REACH/RoHS II
- Ozone-resistant
- Halogen-free
- Silicone-free
Design
| Conductor: | Class 6 |
| Core insulation: | PP/TPE |
| Core identification: | Black |
| Core stranding: | Single core |
| Shield: | Shielded |
| Jacket color: | Black |
| Outer jacket: | TPE |
Technical data
| Temperature range while moved: | -35 up to +90 °C |
| Minimum bend radius while moved: | KRmin ≥ 5 x Ø |
| Vmax supported: | 20 m/s |
| Vmax gliding: | 5 m/s |
| amax supported: | 50 m/s2 |
| amax gliding: | 50 m/s2 |
| Insulation resistance: | > 30 MΩ x km |
| Nominal voltage power core(s): | according to VDE 0.60/1.0 kV |
Varying parameters possible.
Type selection
TRAXLINE® POWER ONE 1000 C TPE 1 KV – Shielded
Core number x Cross-section | Part no. | max. ∅ | Cable weight | Copper index | Datasheet |
|---|---|---|---|---|---|
(1 x 4²) | 49876 | 7.4 | 0.093 | 0.059 | |
(1 x 6²) | 49877 | 8.0 | 0.119 | 0.071 | |
(1 x 10²) | 49878 | 9.2 | 0.169 | 0.122 | |
(1 x 16²) | 49879 | 10.4 | 0.236 | 0.190 | |
(1 x 25²) | 49880 | 11.9 | 0.333 | 0.289 | |
(1 x 35²) | 49881 | 13.3 | 0.453 | 0.393 | |
(1 x 50²) | 49882 | 15.6 | 0.643 | 0.560 | |
(1 x 70²) | 49883 | 17.8 | 0.871 | 0.873 | |
(1 x 95²) | 49884 | 20.3 | 1.099 | 1.029 | |
(1 x 120²) | 49885 | 22.2 | 1.373 | 1.272 | |
(1 x 150²) | 49826 | 25.0 | 1.716 | 1.578 | |
(1 x 185²) | 49887 | 27.4 | 2.081 | 1.911 | |
(1 x 240²) | 49888 | 31.1 | 2.685 | 2.451 | |
(1 x 300²) | 49889 | 35.4 | 3.393 | 2.997 |
Additional types upon request.
Matching with
Cable carriers
Whether cable carriers made of steel, plastic or hybrid product – at KABELSCHLEPP® the conditions of your application determine the material. After assessing your application parameters we will recommend a product that represents the optimum in terms of load capacity, durability and longevity. The material itself is secondary. You can choose from our product portfolio of thousands of types between standard widths and individual millimeter grids – just as required.
Ready-to-connect cable carrier systems – TOTALTRAX®
From pre-assembled cables to complex, ready-to-connect systems, from lot size 1 to series – worldwide thousands of KABELSCHLEPP® systems are reliably in use. The benefits of TOTALTRAX® systems are obvious: just one person of contact, one order number, delivery just-in-time to your production facility, shortest downtimes thanks to plug&play installation.
Accessories – Strain relief devices
For optimum placement with dynamic use of cables.