Skip to main navigation Skip to main content Skip to page footer
Polish
MC1250 LG

MC1250 LG

Aluminum stay LG – Hole stay, split version

Właściwości

  • Optimum cable routing in the neutral bending line. Split version for easy cable routing. Stays also available unsplit.
  • Available customized in 1 mm width sections.
  • Outside/inside: Screw-fixing easy to release.
Stays on every 2nd section, standard (HS: half-stayed)
Stay arrangement on each chain link (VS: fully-stayed)
Bi 100 - 800 mm w 1 sekcje szerokości mm

Wymiary Wymiary

The maximum cable diameter strongly depends on the bending radius and the desired cable type. Please contact us.
Obliczanie długości prowadnika kablowego
Cable carrier length Lk: Lk ≈ LS/2 + LB
Cable carrier length Lk rounded to pitch t
Obliczanie szerokości poprzeczki
Stay width BSt: BSt = Σ D + Σ c + 2 a0
<table class="table"> <thead> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <th class="t"><strong>t</strong><br>[mm]</th> <th class="dmax red"><strong>D<sub>max</sub></strong><br>[mm]</th> <th class="dmin"><strong>D<sub>min</sub></strong><br>[mm]</th> <th class="hg"><strong>h<sub>G</sub></strong><br>[mm]</th> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="bi"><strong>B<sub>i</sub></strong><br>[mm]<sup>*</sup></th> <th class="bst red"><strong>B<sub>St</sub></strong><br>[mm]</th> <!-- Bk und BEF für alle Ketten --> <th class="bk"><strong>B<sub>k</sub></strong><br>[mm]</th> <th class="bef"><strong>B<sub>EF</sub></strong><br>[mm]</th> <th class="cmin"><strong>c<sub>min</sub></strong><br>[mm]</th> <th class="a0min"><strong>a<sub>0</sub> min</strong><br>[mm]</th> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <th class="qk50"><strong>q<sub>k</sub> 50%</strong><br>[kg/m]<sup>**</sup></th> </tr> </thead> <tbody> <tr> <!-- Reihenfolge gemäß Kundenwunsch --> <td class="t">125</td> <td class="dmax red">76</td> <td class="dmin">12</td> <td class="hg">96</td> <!-- Bi Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="bi"> 100 - 800 </td> <td class="bst red"> 105 - 805 </td> <!-- Bk und BEF für alle Ketten --> <td class="bk">BSt + 40</td> <td class="bef">BSt + 40</td> <td class="cmin">4</td> <td class="a0min">12</td> <!-- KR Spalte nur anzeigen wenn einzelner Wert oder Range --> <td class="qk50">4.75 – 11.17</td> </tr> </tbody> </table>
* w1 sekcje szerokości mm ** Hole ratio of the hole stay approx. 50 %
KR [mm]
180 220 260 300 340 380 500
qk 50%: 4.75 – 11.17 mm Hole ratio of the hole stay approx. 50 %

Przykład zamówienia

MC1250
Typ
•
400
Bi [mm]
•
LG
Wariant poprzeczki
•
300
KR [mm]
-
4250
Lk [mm]
HS
Układ poprzeczek

Our technical support can provide help for gliding arrangements: technik@kabelschlepp.de 

Złączki końcowe Złączki końcowe

Recommended tightening torque: 54 Nm for cheese-head screws ISO 4762 - M10 - 8.8

Connection point
F – fixed point
M – driver

Connection type
U – universal mounting bracket

Przykład zamówienia

UMB
UMB
Złączka końcowa
•
F
•
M
Punkt połączenia
U
U
Typ połączenia

We recommend the use of strain reliefs at the driver and fixed point.

Connection point
F – fixed point
M – driver

Connection type
A – threaded joint outside (standard)
I – threaded joint inside
F – flange connection

Connection surface
I – connection surface inside
A – connection surface outside

Przykład zamówienia

Plastic/steel
Plastic/steel
Złączka końcowa
F
M
Punkt połączenia
A
A
Typ połączenia
A
I
Powierzchnia połączenia

We recommend the use of strain reliefs at the driver and fixed point.